PTFE Piston Ring Skin Bowl Automotive Air Pump Piston Ring Seal Ring Medical Oil-Free Skin Bowl

• Customization: Available
• Material: PTFE
• Application: for Industry
• Model NO.: 68*48*0.8
• Type: Shaft Seal
• Performance: Heat Resistance, Chemical, Aging, Ozone
• Shape: O-Ring
• Standard: Standard, Nonstandard
• Hardness: 70 Shore
• Color: as Customers′ Requirements
• Certificate: FDA, RoHS, ISO9001& ISO14001
• Model: 68*48*0.8
• Transport Package: by Sea Air or Express, Customer Request
• Specification: Customizable according to customer requirements
• Trademark: SHEDL
• Origin: Fujian China
• HS Code: 4016939000
• Production Capacity: 2000000piece/Day
• Package Size: 45.00cm * 30.00cm * 45.00cm
• Package Gross Weight: 22.000kg
• Lead Time: 7 days (1 - 1000 Pieces) ; To be negotiated ( > 1000 Pieces)

Product Description

 

Our company specializes in the production of oil-free machine bowl, PTFE bowl piston ring, oil-free piston ring, PTFE bowl and oil-free vacuum pump piston ring manufacturers, follow the user first. The operating principle of quality first has won the majority of users. Polytetrafluoroethylene (PTFE) has excellent properties of chemical inertia, high temperature resistance and low friction coefficient, making it an indispensable important material in chemical, mechanical and other industries. However, its inherent shortcomings such as low strength, wear resistance, creep resistance and poor thermal conductivity limit its application.

Due to the various specifications of the leather bowl and cylinder liner, they can not all be put on the shelf, if necessary, you can contact customer service; Support non-standard customization, regardless of size, quantity, can be customized, factory direct sales, large quantity preferred. (Air compressor leather bowl and cylinder liner 400W,800W, vacuum pump 75*70*27.1,75*70*25.6, 63*57.8*21.3, 64*44, cylinder liner bowl are in stock, vacuum pump AP-1400H; HP-1400; HP-200V; HP-140V; JP-200V; DP-120V; Available on all MYGM-90 models. Some models are common, if you are not clear, you can contact customer service consultation.

Contact information.
Contact Persor:Yanny Li

 

 

 

EPDM	Good resistance to hot water and steam, detergents, caustic potash solutions, silicone oil and greases, many polar solvents, and many diluted acids and chemicals, along with a high level of ozone resistance. EPDM materials are totally unsuitable for use with all mineral oil products (lubricants, fuels).
FKM	Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, transmission and ATF oils to approx. +150°C, fuels, non-flammable hydraulic pressure fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons, water to max. +80°C, excellent resistance to weathering, ozone and ageing, very low gas permeability (and therefore excellent for vacuum application) and resistance to a wide range of chemicals.
HNBR	HNBR is obtained by fully or partially hydrogenating NBR. It leads to considerable improvement in resistance to heat, ozone and ageing, and gives it very good mechanical properties, e.g. good resistance to wear. The media resistance compares to that of NBR. HNBR has a good resistance to some refrigerants. The temperature application range is from -30°C to +150°C.
NBR	Good chemical resistance to mineral oils and greases, hydraulic oils H, HL, HLP, non-inflammable hydraulic pressure fluids HFA, HFB, HFC to approx. +50°C and water to max. +80°C
VMQ	Good resistance to water (up to 100 °C), aliphatic engine and transmission oils, animal and plant oils and fats. VMQ is generally not resistant to fuels, aromatic mineral oils, steam (short term up to 120 °C possible), silicone oils and greases, acids and alkaline compounds.

 

 

 

 

Packaging & Shipping

All  seals will be well packed before shipping.  they will be shipped by sea, by air or by express delivery according to the weight, the quantity or as the customers' requirements.

 

Delivery Time

  2-7 days for samples
 3-15 days for mass production

 

 

 Our Company

We are a manufacture mainly specialize in producing different types of O-rings. O-ring repair kits, customized rubber products.The materials are available in SILICONE, FKM, EPDM, NBR, HNBR, SBR, CR and so on.We have thousands of available O-ring moulds in stock and sample is free from our stock. We can also open new moulds as customers' drawings or physical sample for standard or non-standard O rings and other rubber parts.

 

Exhibition

 

Our Team

 

 

Certification

 

 

Testing Equipments

 

Raw Material

 

Our service
 1.More than 10 years experience in manufacturing o rings

 2. 2-7 days fast sample delivery time.

 3. We have our own import & export license, OEM&ODM service are available.

 4. ISO9001,ISO14001 and RoHS certificate are available.

 5. We accept sample order, trial order and mix order.

 

FAQ

1. What is your MOQ ?
Usually our MOQ is 1000 pcs. But we accept small quantity for the first trial order.
 
2. Can I get sample ?
Sure. We usually provide existing sample for free. But a little sample charge for custom designs. Sample charge is refundable when order is up to certain quantity.
 
3.How long is the sample LEAD TIME?
For existing samples, it takes about 2 days. They are free. If you want your own designs, it takes 3-7 days, subject to your designs whether they need new printing screen, etc.
 
4. How long is the production lead time?
It takes about 15 days for MOQ.
 
5. How much is the freight charge?
To save cost for you and in order that you can get goods earlier, we suggest to deliver by express for small quantity. For large quantity, we suggest to deliver by sea.
 
6. What format of the file do you need if I want my own design?
We have our own professional designers. So you can provide JPG, AI, CDR or PDF, etc. We will draw artwork for mold or printing screen for you.